Access Control
Time & Attendance System

Accessories for Access Control System

TCP/IP Converter, Serial Converter, Repeater

 

Along with Access Control devices and software, other pieces of equipment are necessary to complete an access control system. We offer a complete line of Access Control accessories, including converters, repeaters, electric locks, power supply, exit button and miscellaneous accessories.

TCP/IP Converter

NetEye 1000SA

  • External Serial to Ethernet Converter
  • Miniaturized module device for Network connectivity
  • TCP/IP Kernel and Ethernet installed
  • RS232, RS422, RS485 (optional) supported
  • CPU : Ubicom SX52BD/PQ 50Mhz (8-Bit MicroController, 50MIPS)
  • Memory : 4K Bytes Flash Memory (Program Memory), 256 Bytes SRAM (Data Memory), 2KBytes Flash Memory, (Web Page & System Parameter)
  • Network H/W : 100 Base-T Ethernet Interface (IEEE 802.3)
  • Network Protocol : HTTP, TCP/UDP, IP/ICMP/ARP, IEEE 802.3 (Ethernet)
  • Utility S/W : NetEye Setup Program (Windows98/ME/NT/2000)NetEye Search, IP Setup, Built-in Test Result, Display, Web Page Upload on the Network Loop Test Program (Windows95/98/ME/NT/2000)

iLAN422 / iLAN485

  • External Serial to Ethernet Converter
  • Miniaturized module device for Network connectivity
  • TCP/IP Kernel and Ethernet installed
  • CPU : 16bit CPU, 100MHz
  • Memory : 256 KB ROM & 768KB SDRAM
  • Ethernet : 10/100Base-T,half/full duplex
  • iLAN422 : RS232, RS422 supported
  • iLAN485 : RS232, RS485 supported
  • Baud rate : 1200 bps ~230.4Kbps
  • Power requirement : DC 9~30V, 300mA
  • Operation Temp / Humidity : Humidity 0°C ~ 55°C / 5 ~ 95%RH
  • Storage Temp. : -20 ~ 85 C
  • Dimension : 81mm x 103mm x 30 mm
  • Surge protection : Serial port 15 KV ESD
  • Magnetic protected : Ethernet port 1.5 KV
  • Approval : FCC, CE

iWAN132 (Wireless TCP/IP Converter)

  • Standard Compliance : IEEE 802. 11b/g
  • Security: WEP 64-bit/128-bit data encryption, AES, WPA2
  • Network Mode: Infrastructure, Ad-Hoc LAN ( for configuration / Ethernet hub )
  • No. of ports: 1 RS-232/422/485 port, male DB9, S/W selectable
  • Power : 12VDC
  • Certificate : RoHS, FCC, CE
Serial Converter

CNP200A

  • RS422 signal converted to RS232
  • Multi drop or Point to Point Communication type
  • Built in Surge Protector
  • Built in LED (Power, Transmit, Receive)
  • Power : AC85V-AC250V, 64Hz, 16VA
  • DC12V/500mA
  • Communication - Host / Header : RS232 (DB-9Pin, Male) / 20M (Max.)
  • LED : 68(W)mm x 17(H)mm x 33(D) mm
  • Communication : 115,200 bps
  • Dimension : 100(W) x 60(H) x 135(D) mm
  • Material : Steel

INC300 / INC400

  • INC300 : RS485 to RS232 Cpnverter
  • INC400 : RS422 to RS232 Cpnverter
  • No extra power required
  • Automatic send data line control
  • Type A includes connection cable
  • Power : DC12V
  • Operating Temperature : -25°C ~ +70°C
  • Operating Humidity : 5 ~ 95% RH (Non-Condencing)
  • Dimension : 68(W) x 17(H) x 33(D) mm
Wiegand Converter

WIK Converter

  • Reader Output Data Converter
  • Input Format : Wiegand, ABA Track II, RS232
  • Output Format : Wiegand, ABA Track II, RS232
  • Power : DC12V / 30mA
Wiegand Repeater

WIK Repeater

  • Wiegand Data Repeater (1 pair)
  • WIK Repeater TX, RX
  • Connect WIK Repeater (TX) to RF Reader
  • Connect WIK Repeater (RX) to Controller
  • Power : DC12V / 30mA
Serial Communication Cable

Serial Communication cable for FGR006 and FGR007 series