Access Control
Time & Attendance System

Accessories for Access Control System

Exit Button / Miscellaneous Accessories

 

Along with Access Control devices and software, other pieces of equipment are necessary to complete an access control system. We offer a complete line of Access Control accessories, including converters, repeaters, electric locks, power supply, exit button and miscellaneous accessories.

Exit Button

EB10 / EB20
Push Button (Exposed Mount)

  • Used as a push button switch connected to a controller for access control. Installed on exiting side of door and sends the signal to the device to open the door by pressing the button. Signal output at the point of contact is without voltage.
  • Dimension : EB10 - 38W x 80H x 38D (mm)
                       EB20 - 43W x 98H x 45D (mm)
  • Type : Normal Open / Normal Close
  • Material : Stainless Steel
  • Temperature : -10°C ~ +50°C (+14°F~+122°F)

EB01
Push Button

  • Used as an Exit Button connected to access controller
  • Installed on the existing side of the door and operates without additional power
  • Type : NO(Normal Open) / NC(Normal Close)
  • Material : PVC
  • Dimension : 37W x 124H x 33D (mm)

EB800L / EB800S
Door Release Button with Double Feature (NO/NC)

  • Dimension : EB800L - 86W x 86H (mm)
                       EB800S - 86W x 50H (mm)
  • Suitable for existing buildingMaterial : Stainless SteelTemperature : -10°C ~ +50°C (+14°F~+122°F)
Miscellaneous Accessories/dt>

EKS5
Emergency KEY Switch

  • Used to monitor device On/Off activity. Key activity for On/Off status signal at the point of contact is without voltage. Installed on external side of door in case of emergency to override the access control, if the door does not open in an emergency. Activate the Key to open the door.
  • Dimension :
  • Type : Normal Open / Normal Close
  • Material : Stainless SteelMaterial : BronzeZinc Steel Sheet)

EBG02
Break Glass Fire Emergency Exit Release

  • Dimension : 86W x 86H (mm)
  • Color : Green, Orange, Red, White

DCT100
Door Contact

  • Standard Surface Contact (N/C, N/O Loop)
  • 3/4" Operating Gap
  • Magnetic Type: Ferrite Magnet

PIR100
PIR Sensor

  • Used in access control system, as a sensor by connecting to a controller. It is installed on exiting side of door by using infrared (heat) sensor to send signal to the device to open the door. Signal output at the point of contact is without voltage.
  • Sensor Type : Infrared (Radiant heat)
  • Sensor Area : Solid : 11m x 10m / Plane : 16m x 1.3m
  • Height : 1.5m ~ 2.5m
  • Alarm Output : N.C / N.O Selectable, Interface capacity : DC28V / Max. 0.1A
  • Input Voltage : DC9.5V ~ 18V
  • Current : 18mA (DC12V)
  • Temperature : -10°C ~ +50°C (+14°F~+122°F)