Installed between door frame and door to prevent cable damage from door operation. It also prevents external attempts of cutting and damaging the cable (hidden design)
Dimension (W x H x D) : 24 x 160 x 42mm
Cable : 22AWG UL 1007 Heatproof PVC Cable
Cable Length : 1500mm, 9-pin Connector
Material : Bronze Zinc Steel Sheet
DC-10 Door Cord
Installed between door frame and door to prevent cable damage from exposed cable. It also prevents external attempts of cutting and damaging the cable (hidden design)
Used as push button switch connected to a controller for access control. Installed on existing side of door and send signal to the device to open the door by pressing the button. Signal output at the point of contact is without voltage.
Dimension (W x H x D)
EB-10 : 38 x 80 x 38mm
EB-20 : 43 x 98 x 45mm
Type : NO/NC (Normal Open / Normal Close)
Material : Stainless Steel
EB-801 Door Release Button with Double Feature (NO / NC)
Dimension : 86 (W) x 86mm(H)
Suitable for new buildings
EB-800L / EB-800S Door Release Button with Double Feature (NO / NC)
Dimension :
EB-800L : 80(W) x 80mm(H)
EB-800S : 35(W) x 80mm(H)
Suitable for existing buildings
10. DCT-100 Door Contact
Standard Surface Contact (NC, NO Loop)
3/4" Operating Gap
Magnetic Type : Ferrite Magnet
11. PIR-100 PIR Sensor
Used in access control system, also as a sensor by connecting to controller. Installed on the existing side of the door by using infrared (heat) sensor to send signal to the device to open the door. Signal output at he point of contact is without power.
Sensor Type : Infrared (Radiant heat)
Sensing Area : (Solid) 11 x 10m, (Plane) 16 x 1.3m
Height : 1.5 ~ 2.5m
Alarm Output : NC/NO Selectable
Interface Capacity : DC28V/ Max. 0.1A
Input Voltage : DC 9.6 ~ 18V
Cuttent : 18mA (DC 12V)
Operating Temp. : -10° ~ +50°C (+14° ~ +122°F)
12. EKS-5 Emergency Key Switch
Used to monitor door ON/OFF operation. Key activity for ON/OFF status signal at the point of contact is without power. Installed on the external side of the door to override the access control, if the door does not open in an emergency. Activates the key to open the door.
Type : NO / NC
Material : Stainless Steel
13. Break Glass Fire Emergency Release(EBG-01 / EBG-02)
EBG-01 Break Glass Fire Emergency Exit Release
Connected to the device to activate the siren and alarm output in an emergency. Installed on existing side of the door to override the access control system if the door does not open in an emergency
EH-9 Electric Hinge
)
