|
Model |
FG-R006 |
FGR-006EX |
| CPU |
32bit ARM9 and Dual 8bit
Microprocessor |
| Memory |
Fingerprint
Module |
Program |
128KByte Flash ROM |
| Data |
128KByte / 256KByte / 512KByte
Flash Memory |
| Controller |
Program |
128KByte Flash ROM |
| Data |
256KByte Flash
Memory |
| Fingerprint
User |
1,000 / 2,000 / 4,000
Fingerprint Users |
| Fingerprint
Templates Size |
800Bytes for 2 Fingerprint
Templates |
| Read
Range |
Passive Type |
IDC-80 / IDC-170 |
Up to 4 inch (10cm) |
Depending on External
Reader |
| IDK-50 / IMC-125 |
Up to 2 inch (5cm)
|
| Active Type |
IDA-150 / IDA-200 compatible |
| Reading Time
(Card) |
30ms. |
| Verification
Time |
Less than 1sec. |
| Identification
Time |
Less than 2sec. |
| Power /
Current |
DC 12V / Max. 350mA |
| External Reader
Port |
N/A |
1ea: 26 / 34bit Wiegand,
4 / 8bit
Burst for PIN,
ABA Track II |
| Communication |
RS-232 / RS-422 / RS-485
(Max.255 ch), TCP/IP (External LAN Converter required) |
| Baud Rate |
9,600bps (default) / 4,800bps,
19,200bps and 38,400bps (selectable) |
| Input Port |
2ea (External LED Control,
External Buzzer Control) |
| Output Port |
2ea (Error-Output , OK-Output
(Open Collector Output)) |
| Output Format |
26bit Wiegand (default), ABA
Track II (optional) |
| LED Indicator /
Beeper |
3 Array LED Indicators (Red
and Green) / Piezo Buzzer |
| Operating Temperature |
Fingerprint Module / LCD
|
-15° to +40°C (+5° to
+104°F) |
|
Controller / RF Reader
|
-35° to + 65°C (-31° to
+149°F) |
| Operating
Humidity |
10% to 90% relative humidity
non-condensing |
| Color /
Material |
Pearl Dark Gray and Light Gray
/ Polycarbonate |
| Dimension (W x H x
T) / Weight |
2.6Ħħ x 5.1Ħħ x 2.0Ħħ (66mm x
129mm x 52mm) /
259.5g (0.57lbs)
|
| Certification |
FCC, CE, MIC |
){kind=link}