|
Model
|
FINGER-007SR |
| CPU |
32 bit ARM9 and Dual 8 bit Microprocessor |
|
Memory
|
Fingerprint
Module |
Program memory |
128KByte ROM |
| Data Memory |
128KByte / 256KByte / 512KByte Flash Memory |
| Controller |
Program Memory |
64KByte Flash Memory |
| Data Memory |
512KByte SRAM (Battery back up) |
| Fingerprint Users |
1,000 / 2,000 / 4,000 Fingerprint Users
|
| Event Buffers |
26,000 Event Buffers |
| Fingerprint Template Size |
800Bytes for 2 Fingerprint Templates |
Read
Range |
ISC-80
|
Up to 4 inch (10cm) |
|
ISK-50 / IHC-80 / IMC-135
|
Up to 2 inch (5cm)
|
| Reading Time (Card) |
30ms |
| Verification Time |
Less than 1sec. |
| Identification Time |
Less than 2sec. |
| Power / Current |
DC 12V / Max.300mA |
| External Reader Port |
1 port (26bit Wiegand, 4 / 8bit Burst for
PIN for Anti-Pass-Back) |
| Communication |
RS-232 / RS-422 / RS-485 (Max.32 ch),
TCP/IP
(External LAN Converter required) |
| Baud Rate |
9,600bps (default) / 4,800bps, 19,200bps
and 38,400bps (selectable) |
| Input Port |
4ea (Exit Button, Door Sensor, Aux #1,
Aux #2) |
| Output Port |
2ea (2 FORM-C Relay Output (COM, NO, NC)
/ DC12V~18V, Rating Max.2A) |
| 2ea (TTL Output / DC5V, Rating
Max.20mA) |
| LCD |
Character LCD (2 Lines x 16 Char)
2.62Ħħ x 0.55Ħħ (65.6mm x 13.8mm) Screen |
| Keypad |
16 Key Numeric Keypad with Back
Lighting |
| LED Indicator |
3 Array LED Indicators (Red, Green and
Yellow)
|
| Buzzer |
Piezo Buzzer |
| Operating Temperature |
Fingerprint Module |
-15° to +40°C (+5° to +104°F )
|
| LCD |
0° to +50°C (+32° to +122°F) |
| Controller |
-15° to +70°C (+5° to +158°F)
|
| RF Reader |
-35° to +65°C (-31° to +149°F) |
| Operating Humidity |
10% to 90% relative humidity
non-condensing |
| Color / Material |
Dark Pearl Gray / Polycarbonate |
| Dimension (W x H x T) |
6.36Ħħ x 5.28Ħħ x 1.9Ħħ (161.5mm x 134mm x
48.5mm) |
| Weight |
547g (1.21lbs) |
| Certification |
UL, FCC, CE, MIC |
){kind=link}