Fingerprint & ASK format Proximity Access Controller

IP-FGR007

IP-FGR007 is an intelligent Fingerprint Identification Access Controller with a built-in 125kHz Proximity Reader [ASK format], to provide you fielded-proven reliability and cost-effective solution wherever access control and buddy-punching free time attendance are required.

IP-FGR007 has following points as compared with IP-FINGER007

No keypad and LCD Display
2,000 event buffers (IP-FINGER007 -> 10,000 ~ 50,000)
Only two input ports (No Aux 1 and Aux 2)
Only two output ports (No TTL outputs)

STARWATCH DUAL PRO-1, DUAL PRO-II and STARCHWATCH STANDARD software will provide with IP-FGR007 for access control and time & attendance application.

Features

Fingerprint Recognition and 125kHz/ASK format Proximity Standalone Access Controller

1:1 Fingerprint Verification and 1:N Fingerprint Identification

1:N Identification (Fingerprint only) mode by Auto Touch Sensor

Dual Functions of Access Control and Time Attendance

IP-FGR007 is used both for access control and time & attendance applications with our application software provided. The Access Control is to control the employees from accessing the business premises by locking and unlocking the door. You can define the authorized time for each individual or for a group of individuals and can specify which has the rights to access a particular terminal in a multi-device environment, where multiple doors are controlled by different devices. The Time Attendance is to record the Check-In / Check-Out time of the employees and totally eliminates the buddy-punching problems and other frauds.

1,000 (default) / 2,000 / 4,000 Fingerprint Users, 2,000 Event Buffers

User friendly device allows you to register 1,000 fingerprints(expandable to 2,000 or 4,000 as optional and and Dynamic Control of Memory up to 2,000 Event Buffers

Fingerprint Registration

Fingerprint Registration via Master Card, STARWATCH DUAL PRO S/W I/II and FINGERPRINT ENROLLMENT PRO software

Operating Mode selectable by Individual ID

Fingerprint Templates up/download via Laptop (optional, RS232C Stereo Jack required)

Standalone and Network Communication via RS232 / RS422 / RS485 / TCP/IP

IP-FGR007 can be used as not only a Stand-alone System without a dedicated PC or PC-controlled system via RS232 in a single device environment, but also a Networked System communicating via RS422 or RS485 (addressable up to 32 devices) or TCP/IP (External TCP/IP Converter required), Wireless in a multi-device environment. All control setting values such as fingerprints data, RFID, Input and output configurations, real time clock and time schedule can be downloaded/uploaded from/to the host computer and all event transaction data stored in the buffer reports to the host computer.

One External Reader Port for Anti-passback Function

26 bit Wiegand and 4/8 bit Burst for PIN. When an extra reader for exit is connected, you can set Anti-passback mode that will not allow any card to re-enter unless it has been used to exit. This feature prevents a user from entering, sliding his or her card under the door to another individual, and allowing that unauthorized individual to enter.

Independent two Inputs and two 2 Form-C Relay Outputs

Independent 2 Input ports provide you to connect EXIT button and sensors such as door contact, PIR sensor and glass breakage sensor, etc. and you can program related output sources and activating times from built-in keypads. Two FORM-C relay outputs are built-in with anti-magnetic protection

Programmable Operation Mode

RF only / Fingerprint only / RF + Fingerprint

Time Schedule - 10 Time Codes, 5 Time Untervals, 10 Holiday Codes and 32 Holidays

10 Time Codes, 5 Time Untervals, 10 Holiday Codes and 32 Holidays - You can define 10 time schedules (up to 5 time ranges per schedule) and 10 holiday schedules (up to 32 holidays per schedule) for each individual or a group of individuals.

Duress Feature

When is connected to an alarm system, entering the 2-digit "Duress code" and then opening the door using general process will automatically send a silent duress alarm to your security facility, while allowing the intruders to access a secure area. You can select Duress Mode enable or disable.

Dual Tamper Switches

When the IP-FGR007 in operation is broken up or detached from the wall by force, it makes its buzzer sound, generating alarm-state outputs. The alarm state is cancelled as the controller reads an registered card or the Master card, or when the host computer as

Alarm Event Monitoring using Tamper Switch (by Application Software)

Firmware Upgrade via Software

High Protection from Scratch and ESD (Electro Static Discharge)

High Quality Optical Sensor

Compatible Software: STARWATCH DUAL PRO I / II, STARWATCH STANDARD

3 color LED indicators (red, green and yellow)

CE, FCC, RoHS Certificate