Access Control
Time & Attendance System

4 Door Access Control Panel for Medium Sized System

iTDC / iTDC-SR

 

iTDC / iTDC-SR 4 Door Access Controller

iTDC / iTDC-SR are intelligent Mult-Door Access Control Panels that is capable of controlling 2 doors with entry and exit readers or 4 separate doors with entry reader only (EIO88 Expansion Board required), to meet the market requirements for a simple and cost-effective access controller.

The iTDC / iTDC-SR provide four external reader ports for 26bit Wiegand (iTDC) or 34 bit Wiegand (iTDC-SR) and 4 / 8 bit Burst for PIN and allows the user to register 1,000~20,000 (Expandable to 30,000 / 40,000 / 50,000) User ID numbers and register / delete / change user cards. And also, upon the number of those registered cards, 20,000 ~ 29,500 (14,000/8,000/3,000) matters of data (exit / entrance) status can be saved in its event memory.

The iTDC / iTDC-SR can be installed and managed inside the security zone for higher security. Experience the ultimate high-level security access control system with iTDC / iTDC-SR

The iTDC / iTDC-SR are provided with a board only or full packages including back-up battery, power supply and enclosure, EIO88 expansion board, TCP/IP module, LCD and keypad for front programming are optional.

Features

  • Intelligent 4 Door Access Control Panel (EIO88 required to control 3 and 4 Doors)
  • Dynamic Control of Memory up to 50,000 Users / up to 29,500 Event Buffers
    - 1,000 ~ 20,000 / 30,000 / 40,000 / 50,000 Users
    - 20,000 ~ 29,500 / 3,000 / 8,000 / 14,000 Event Buffers
  • Independent 7 Inputs and 7 Outputs including 4ea of 2 Form-C Relay Outputs
  • Expansion I/O Board available (EIO88: 8 Inputs / 8 Outputs)
  • Standalone/Network Communication via RS232 / RS422 / RS485 (Max.255ch), TCP/IP (Internal TCP/IP Module required as optional)
  • TCP/IP Communication supported
    - VA.1.0 and above : Internal LAN module required(optional)
    - V5.2.0 and below : External Converter required(optional)
  • Optional LCD display and Keypad connectable to Control for Standalone Operation, Manual Setting
  • 4 Reader Ports for Anti-passback Function : 26bit (iTDC) / 34bit (iTDC-SR) Wiegand and 4 / 8bit Burst for PIN
  • 2 Men Operation supported
  • ARM / DISARM Function for Alarm Panel
  • 2 Levels Individual Door Opening Time Setting available for handicapped person
  • Remain ID & Event Data and Setting Value in case of Electric Outage
  • Optional LCD display and Keypad connectable to control for Standalone Operation, Manual Setting
  • Duress Mode Function
  • Guard Tour Management
  • ed Reader Signal Check
  • Alarm Event Monitoring using Tamper Switch (by Application Software)
  • Communication Status via LED Indicator
  • Options: LCD display, Keypad (for standalone and manual setting)
  • Compatible Software: STARWATCH DUAL PRO I / II, STARWATCH STANDARD