13.56MHz Contactless Smart Card Access Controller

SR505

 

SR-505 is a 13.56MHz Contactless Smart Card Access Control and Time Attendance System with a dual 8-bit microprocessors, to provide you fielded-proven reliability and cost-effective solution wherever access control and buddy-punching free time attendance are required. It is possible to use as standalone or network communication via RS-422 and TCP/IP protocol. It is designed for low cost but high security as well as convenience and reliability STARWATCH DUAL PRO-1, DUAL PRO-II software and STARWATCH STANDARD will provide with SR505 for access control and time & attendance application

Features

• 13.56 MHz Contactless Smart Card Access Controller
• ISO14443 type A compatible
• Serial Number Read only
• Dual Function for Access Control and Time & Attendance
• Dynamic Control of Memory
  - up to 50,000 Users / up to 50,000 Event Buffers (Available on Version A1.0 and later)
  - Dynamic Control of Memory up to 4,000 Users / up to 26,000 Event
• Buffers (Available on Version 8.0.0 and before)
• One External Reader Port for Anti-passback Function :  26bit Wiegand, 4 / 8bit Burst for PIN
• Standalone / Network Communication via RS232 / RS422 / RS485  (Max.32ch)
  - RS485 is not available on VA.1.0 and up
• TCP/IP Communication supported
  - VA.1.0 and above : Internal LAN module required(optional)
  - V8.0.0 and below : External Converter required(optional))
• Independent 4 Inputs and 4 Outputs including 2 ports of 2 Form-C Relay
• Duress Mode Function
• Dual Tamper Switches
• Alarm Event Monitoring using Tamper Switch (by Application Software)
• Operation Mode Selection: SMART CARD only / SMART CARD + P/W (4 digit) / PIN (4~6 digit) only
• Compatible Software: STARWATCH DUAL PRO I / II, STARWATCH STANDARD